Holophane Emergency Lighting
Exit & Emergency Lighting
Holophane Emergency Lighting and Exit Lights are aesthetically pleasing LED fixtures. Holophane emergency and exit lights are industry-leading products and solutions, with the greatest value.
LHD2E Emergency Exit Sign
The LHD2E Emergency Exit Sign is suitable for use in Class 1 Division 2 applications. Battery back up versions provide a minimum of 90 minutes of emergency operation upon loss of AC power.
DeLeon HD Hazardous Remote Lamp Head Exit Sign
LHD2R Emergency Exit Sign
The LHD2R Remote Lamp Head is suitable for use in Class 1 Division 2 applications. Battery back up versions provide a minimum of 90 minutes of emergency operation upon loss of AC power.
DeSoto™ Industrial LED NEMA 4X Rated Emergency Light
DSL46 Emergency Lighting Unit
The DeSoto™ DSL46 is NEMA 4X, IP66 and NSF rated providing protection in hose-down or harsh environments where moisture, dirt and dust would limit the life of ordinary emergency lighting.
DeSoto™ Industrial LED Wet Location Emergency Light
DSL3 Emergency Lighting UnitDeSoto™ DSL3 features a vertically-oriented housing ideal for light industrial mounting applications such as a pole, I-beam or Unistrut.
The DeSoto™ DSL3 comes standard with quick-mounting brackets, upgraded Lithium Iron Phosphate batteries, remote testing and self-diagnostics feature, a minimum of 90-minutes of illumination for the rated wattage upon loss of AC power with constant light output over the full discharge period and a minimum of 90-minutes of illumination upon loss of AC power with constant light output over the full discharge period.
Hazardous Location Emergency Exit Sign
HDXE Emergency Exit SignSuitable for use in Class I, Div. 1, Groups C& D, Zone 1, Groups IIA & IIB; Zone 2, Groups IIA, IIB + H2 &IIC; Class I, Div. 2, Groups A, B, C & D; Class II Div. 1&2, Groups E, F & G; and Class III hazardous location areas. Certain airborne contaminants can diminish the integrity of acrylic. Please refer to the Acrylic Environmental Compatibility Chart (HL-2445) for suitable uses. The HDX Series features an LED light engine and a copper free cast aluminum enclosure designed to withstand the pressure of internal arc generated explosions without allowing propagation to the hazardous atmosphere. Available in wall/pendant or end mount configurations with 1/2" NPT conduit entries.
Wet Location LED Exit Sign
DLTL Emergency Exit SignIdeal for wet location areas requiring exit signs for AC only or battery back-up power that are subject to saturation with non-mechanically delivered water. Contemporary designed polycarbonate housing is impact-resistant, scratch resistant and corrosion-proof with a heavy-duty polycarbonate clear housing lens. Self-Diagnostics option: provides a 30 second test every 30 days, 30 minutes every 180 days and a 90 minute annual diagnostic evaluation of the LED light source. UL94V-0 flame rating. Dual voltage input capability (120/277V). Battery Operation (EL Option): sealed, maintenance-free nickel-cadmium battery delivers 90 minutes rated capacity.
DeSoto™ Wet Location Emergency Lighting Unit
DM30 Emergency Lighting UnitIdeal for wet location areas requiring emergency lighting that are subject to saturation with non-mechanically delivered water. Contemporary designed polycarbonate housing is impact-resistant, scratch resistant and corrosion-proof. There are two 1.9W LED lamp, PAR36 style lamp. Dual voltage input capability (120/277V). Battery operated.
Vandal-Resistant, All-Conditions Exits with LED Lamps
DLTLX Emergency Lighting UnitIdeal for high-abuse, cold weather (CW option-down to -40°C), and wet location applications such as schools, security areas/prisons and parking garages. NEMA 4X option available for wet and hose-down applications. Clear, UV-stable polycarbonate cover is .130" thick to prevent cracking or breaking. Cover is secured with four stainless steel, Torx 120 tamper-proof screws with center pin. The typical life of the exit LED lamp is 10 years based on continuous operation. Self Diagnostics option: provides a 5 minute test every 30 days and 30 minute test once every six months. Dual voltage input capability (120/277V). Emergency Operation: Sealed, maintenance-free nickel-cadmium battery delivers 90 minutes capacity to lamp.
Magellan QM LED Exit-Unit Combo
QMLED Emergency Exit SignIdeal for applications that need both an exit and emergency lighting. Its reduced height makes the combo unit a great fit for above-the-door and other tight-fit locations. The Magellan QM LED Combo unit is ideal for applications requiring both exit and emergency lighting. It's streamlined height makes the combo unit a great fit for above-the-door and other tight-fit applications. The QM LED delivers 24' center-to-center spacing to meet the NFPA 101 Life Safety Code with fewer fixtures.
Cortez™ LED Adjustable Optics 640 Lumens Emergency Light
CZQ4L Emergency LightThe CZQ4L from Holophane® is an aesthetically pleasing emergency LED light fixture. It provides a minimum of 90 minutes of illumination when there is a loss of power. Equipped with four high performance LEDs and full range swivel lamp heads it is ideal for a wide-range of mounting height applications (from 7.5' to 24'), requiring aim-able optics. The linear pattern provides wide uniform distributions that deliver broad spacing up to 67' and low max to min ratios that far exceed code requirements.
The CZQ4L optional Lithium platform comes standard with universal input voltage (120-347 Volt). The upgraded Lithium Iron Phosphate battery provide extended run-times of up to 4 hours or up to 32 watts of remote capacity. Also, remote testing and self-diagnostics that meet and exceed code required testing while significantly reducing the time and cost of compliance. Plus, constant light output over the full discharge period.
Cortez™ LED Adjustable Optics 640 Lumens Emergency Light
DSL4XRE Emergency Remote LED Light HeadThe DeSoto™ DSL4XRE industrial emergency remote light by Holophane® is perfectly suited for industrial, manufacturing and municipal applications. The DSL4XRE is specifically designed for heavy and demanding environments. With superior-performance lamp heads the DSL4XRE allows for broad spacing at higher mounting heights. With universal DC voltage input the DSL4XRE is listed to be used with a variety of battery units.
Magellan Die-Cast Exit Sign
MEX Emergency Exit SignThe Signature Exit is durable, yet attractive with a die-cast alumiinum housing. It features precise edges, clean lines and no exposed hardware. Ideal for applications requiring attractive die-cast aluminum signage, superior illumination and low energy consumption. Standard finish is brushed aluminum face with matte black housing. Other finishes available Self-diagnostics option available. Completely concealed chevron directional indicator knockouts. Universal input voltage capabilities (120V thru 277V, 50 or 60hz). Sealed, maintenance free nickel cadmium battery.
Cortez™ Architectural Outdoor LED Emergency Light
CZAFB Emergency LightThe Cortez™ CZAFB emergency light offers rugged construction, quick installation, and premium standard features such as die-cast aluminum construction, a scratch-resistant polyester powder coat finish, and wide-throw light distribution. Available for indoor and outdoor installations, the CZAFB is ideal for hotels, shopping malls, and office buildings where design continuity is desired between the indoor and outdoor lighting.
Cortez™ LED Adjustable Emergency Wet Location Remote Light Head
The CZQRW is designed to match the appearance of the Cortez™ series units for use as part of an emergency lighting system providing light for the path of egress in wet location applications. With fully adjustable optics these remotes provide high-quality light output when it is needed most.
Wet Location Emergency Exit-Unit Combo
The DLTLC from Holophane is a wet location low-profile combination of exit and emergency light. Available with red or green letters. It is ideal to safely illuminate the path of egress above-the-door at low to medium mounting heights. This luminaire will provide 90-minutes of emergency power in the event of power loss. The contemporary designed polycarbonate housing is impact-resistant, scratch-resistant and corrosion-proof with a heavy-duty polycarbonate clear housing.
Cortez™ Architectural Outdoor LED Emergency Light
CZAFP Emergency LightThe Cortez CZAFP emergency light offers rugged construction, quick installation and premium standard features such as die cast aluminum construction, a scratch resistant polyester powder coat finish and high lumen output. Available for indoor and outdoor installations, the CZAFP offers field-adjustable forward- or wide-throw light distribution and normal on-off photocell control options. It is ideal for hotels, shopping malls, and office buildings where a more stylish design of indoor and outdoor emergency lighting is desired.
Cortez™ Architectural Outdoor LED Emergency Light
The CZQRE is designed to match the appearance of the Cortez™ series units for use as part of an emergency lighting system providing light for the path of egress. With fully adjustable or fixed optics, these compact and low-profile remotes provide high-quality light output when it is needed most.
DeSoto™ Industrial LED Wet Location Emergency Remote Light Head
The CZQRE is designed to match the appearance of the Cortez™ series units for use as part of an emergency lighting system providing light for the path of egress. With fully adjustable or fixed optics, these compact and low-profile remotes provide high-quality light output when it is needed most.
Cortez™ LED Adjustable Optics 220 Lumens Emergency Light
The CZQ2L from Holophane® is an aesthetically pleasing emergency LED light fixture. It provides a minimum of 90 minutes of illumination when there is a loss of power. Unique track and swivel arrangement permits full range of direction for lamp head aiming for wall and ceiling mount applications (mounting heights range from 7.5' to 10'), making installation easy while maintaining the maximum path of egress coverage. The linear pattern provides wide uniform distributions that deliver broad spacing up to 33' and low max to min ratios that far exceed code requirements.
Cortez™ LED Adjustable Optics 1100 Lumens Emergency Light
The CZQ6L from Holophane® is an aesthetically pleasing emergency LED light fixture. It provides a minimum of 90 minutes of illumination with constant light output when there is a loss of power. Equipped with six high performance LEDs and full range swivel lamp heads it is ideal for a wide-range of mounting height applications (from 7.5' to 30+'), requiring aimable optics. The linear pattern provides wide uniform distributions that deliver broad spacing up to 98' and low max to min ratios that far exceed code requirements.
The CZQ6L comes standard with universal input voltage (120-347 Volt). The upgraded Lithium Iron Phosphate batteries provide extended run-times of up to 4 hours or up to 32 watts of remote capacity. Also, remote testing and self-diagnostics that meet and exceed code required testing while significantly reducing the time and cost of compliance. Plus, constant light output over the full discharge period.
Hazardous Location Emergency Exit Sign
Suitable for use in Class I, Div. 1, Groups C& D, Zone 1, Groups IIA & IIB; Zone 2, Groups IIA, IIB + H2 &IIC; Class I, Div. 2, Groups A, B, C & D; Class II Div. 1&2, Groups E, F & G; and Class III hazardous location areas. Certain airborne contaminants can diminish the integrity of acrylic. Please refer to the Acrylic Environmental Compatibility Chart (HL-2445) for suitable uses. The HDX Series features an LED light engine and a copper free cast aluminum enclosure designed to withstand the pressure of internal arc generated explosions without allowing propagation to the hazardous atmosphere. Available in wall/pendant or end mount configurations with 1/2" NPT conduit entries.
The CZQ6L comes standard with universal input voltage (120-347 Volt). The upgraded Lithium Iron Phosphate batteries provide extended run-times of up to 4 hours or up to 32 watts of remote capacity. Also, remote testing and self-diagnostics that meet and exceed code required testing while significantly reducing the time and cost of compliance. Plus, constant light output over the full discharge period.
Cortez™ Die-Formed Steel Emergency Unit
Designed for general/light industrial environments requiring a steel housing. Provides a minimum of 90 minutes of illumination for the rated wattage upon AC power loss. Incorporates glass sealed-beam style lamps in polycarbonate lamp.
Cortez™ Die-Formed Steel Emergency Unit
Designed for general/light industrial environments requiring a steel housing. Provides a minimum of 90 minutes of illumination for the rated wattage upon AC power loss. Incorporates glass sealed-beam style lamps in polycarbonate lamp.
DeSoto™ NEMA-Hazardous Remote Light Head
Provides a minimum of 90 minutes of illumination for the rated wattage upon loss of AC power. Designed for Class 1 Division 2 applications. DeSoto~8482; M70 features impact resistant fiberglass reinforced polyester housing gray in color with stainless steel hardware. Housing suitable for use in NEMA 3, 4X and 12 areas and in Class1 Division 2 Groups A, B, C & D, Zone 2 Groups IIA, IIB + H2 & IIC areas. Nickel cadmium units additionally suitable for use in Class II, Division 2, Groups F & G areas. Listings: UL Listed
Cortez™ Die-Formed Steel Emergency Unit
Designed for general/light industrial environments requiring a steel housing. Provides a minimum of 90 minutes of illumination for the rated wattage upon AC power loss. Incorporates glass sealed-beam style lamps in polycarbonate lamp.
Cortez™ Die-Formed Steel Emergency Unit
Designed for general/light industrial environments requiring a steel housing. Provides a minimum of 90 minutes of illumination for the rated wattage upon AC power loss. Incorporates glass sealed-beam style lamps in polycarbonate lamp.
Cortez™ Die-Formed Steel Emergency Unit
Designed for general/light industrial environments requiring a steel housing. Provides a minimum of 90 minutes of illumination for the rated wattage upon AC power loss. Incorporates glass sealed-beam style lamps in polycarbonate lamp.
Cortez™ Die-Formed Steel Emergency Unit
Designed for general/light industrial environments requiring a steel housing. Provides a minimum of 90 minutes of illumination for the rated wattage upon AC power loss. Incorporates glass sealed-beam style lamps in polycarbonate lamp.
Cortez™ Die-Formed Steel Emergency Unit
The LHD2S Emergency Exit Sign Combo is suitable for use in Class 1 Division 2 applications. Battery back up versions provide a minimum of 90 minutes of emergency operation upon loss of AC power.
DeLeon HD Hazardous Exit Sign Combot
The LHD2D Emergency Combo Exit Sign is suitable for use in Class 1 Division 2 applications. Battery back up versions provide a minimum of 90 minutes of emergency operation upon loss of AC power.
DeSoto™ NEMA-Hazardous Remote Light Head
Suitable for use in Class I, Div. 1, Groups C& D, Zones 0, 1 & 2, Groups IIA, IIB + H2 &IIC; Class I, Div. 2, Groups C & D, Zone 2, Groups IIA, IIB + H2 & IIC; Class II Div. 1, Groups E, F & G and Class III hazardous location areas. DeSoto HR features Copper free cast aluminum enclosure designed to withstand the pressure of internal arc generated explosions without allowing propagation to the hazardous atmosphere. Ceiling and wall mount units have a universal junction box with four 3/4" threaded entries and three entry plugs. Listings: UL Listed