5 Minute Read

This blog was originally published August 18, 2023, and has been updated October 15, 2026.

A photometric plan is a computer-generated lighting simulation that predicts how a proposed lighting system will perform before installation. It shows expected foot-candle levels, fixture locations, mounting heights, light distribution, and uniformity, helping identify potential dark spots or overly bright areas before purchasing equipment.

For commercial property owners, architects, and facility managers, a photometric lighting plan connects product selection with actual site conditions. Instead of choosing fixtures by wattage or lumen output alone, project teams can evaluate how those fixtures will illuminate a warehouse, office, sports facility, or parking lot.

Key Takeaways

    • A photometric plan predicts lighting performance using a digital model of the proposed installation.
    • Accurate dimensions, mounting heights, obstructions, and fixture-specific IES data make the simulation more useful.
    • Minimum light levels and uniformity reveal coverage problems that an average alone can hide.
    • LED retrofits may benefit from photometric analysis even when existing fixture locations remain unchanged.
    • Changes to fixtures, optics, mounting heights, or layouts should trigger a review of the calculations.

Is a Photometric Plan the Same as a Photometric Study?

A photometric plan, photometric study, and photometric analysis generally describe closely related parts of the same lighting evaluation.

A photometric study or analysis refers to the simulation and calculations used to assess lighting performance. The photometric plan is typically the drawing or report presenting those results alongside the proposed fixture layout. In commercial lighting conversations, these terms often appear interchangeably.

Photometry measures visible light based on how the human eye perceives brightness and distribution. For project planning, a central measurement is illuminance: the amount of light reaching a surface, expressed in foot-candles or lux. One foot-candle equals approximately 10.76 lux.

lighting design services

What Does a Photometric Plan Show?

A photometric lighting plan shows where fixtures will be installed and how much light is predicted to reach selected surfaces.

Typical deliverables include:

    • Fixture placement, quantities, and product identifiers.
    • Mounting heights and fixture aiming or orientation.
    • A calculation grid showing foot-candle or lux values.
    • Average, minimum, and maximum light levels.
    • Uniformity ratios comparing light levels across an area.
    • Light distribution illustrated through numerical values, contour lines, or color maps.

The calculation surface matters. A parking lot may be evaluated at pavement level, while office lighting may be evaluated at desk height. Sports projects may also require vertical calculations to assess light reaching players or objects above the playing surface.

These results help teams locate gaps between fixtures, excessive concentrations of light, and potential spill light beyond the intended area.

What Information Is Needed for a Photometric Plan?

A useful photometric plan requires accurate site geometry, installation details, performance targets, and photometric data for the specific fixtures being considered.

Missing information forces the designer to make assumptions. A simulation based on an estimated pole height or a generic fixture may look detailed while providing limited guidance for the actual project.

Information needed

What to provide

Why it matters

Site plans and dimensions

Scaled CAD drawings or dimensioned PDF plans showing buildings, room boundaries, parking areas, walkways, and property lines

Establishes the size and shape of the areas being illuminated

Mounting heights

Fixture heights above grade or floor level, plus the height of the calculation surface

Affects coverage, intensity, and spacing

Existing or proposed fixture locations

Pole positions, ceiling layouts, wall mounting points, quantities, and aiming directions

Defines where light originates and how fixture coverage overlaps

Target light levels

Required average and minimum illuminance, uniformity criteria, and areas with different lighting needs

Provides measurable criteria for evaluating the design

Obstructions

Buildings, shelving, equipment, canopies, trees, and other objects that may block light

Helps predict shadows and interrupted coverage

Fixture-specific IES data

Manufacturer photometric files matching the proposed model, output, and optical distribution

Supplies the light distribution information used in the calculations

Why Is the Specific Fixture’s IES File Important?

An IES file contains photometric data describing how a fixture distributes light in different directions. Lighting software uses this information to calculate how that product will illuminate the modeled space.

Two fixtures with similar wattage and lumen output can produce substantially different results because their optics direct light differently. A file for another product or beam distribution may therefore misrepresent the proposed installation.

During file preparation, confirm that the IES data corresponds to the selected fixture configuration, including applicable output settings and accessories.


Build a Better Lighting Design with a Professional Photometric Plan

A well-developed photometric plan is essential for ensuring commercial lighting systems deliver the right illumination, uniformity, and performance for their intended applications. From evaluating fixture placement and light distribution to meeting project specifications and lighting requirements, photometric planning helps architects, engineers, contractors, and developers make informed design decisions before installation begins.

Explore our Design Assist & LED Lighting Specification Services to see how Stouch Lighting supports commercial projects with product-neutral lighting expertise, photometric layouts, and specification assistance. Then, connect with our lighting team to discuss your photometric planning needs and how we can help bring your lighting design to life.

👉 Explore Our Design Assist & LED Lighting Specification Services

👉 Tell Us About Your Photometric Plan


What Additional Details Improve the Simulation?

Interior studies may need ceiling heights and surface reflectances, which describe how much light walls, ceilings, and floors reflect. Exterior studies may need grade changes, neighboring properties, and mounting restrictions.

The team should also identify operating conditions, such as full output or dimmed operation, and whether the results represent initial or maintained light levels.

Initial calculations estimate performance when the system is new. Maintained calculations apply a light loss factor, or LLF, to account for expected output reductions. These can include lumen depreciation as the light source ages and dirt depreciation as dust or debris accumulates on fixtures.

The LLF should reflect the selected equipment, environment, and maintenance assumptions. For example, an LLF of 0.80 means the calculation uses 80% of the modeled initial output.

How Is a Photometric Plan Created?

A photometric plan is created by modeling the site, placing proposed fixtures, calculating illumination, and adjusting the design against project requirements. Industry lighting simulation tools include AGi32, Visual Lighting, and DIALux.

The process typically follows five steps:

    • Establish lighting goals, calculation surfaces, and applicable project criteria.
    • Build the digital model using site dimensions, mounting conditions, and relevant surfaces or obstructions.
    • Import fixture-specific IES data and assign fixture locations, heights, aiming, and light loss factors.
    • Calculate light levels and uniformity across defined evaluation areas.
    • Revise fixture selection or placement, then recalculate and document the results.

This process allows teams to compare options before committing to purchases. For example, adjusting an optical distribution may improve coverage without adding another pole.

Why Does Lighting Uniformity Matter?

Lighting uniformity describes how evenly light is distributed across an evaluated area. A satisfactory average can conceal dark locations between brighter areas.

For example, an average of 2 foot-candles and a minimum of 0.5 foot-candles produces an average-to-minimum ratio of 4:1. A lower ratio indicates more even illumination for that metric, but acceptable criteria depend on the application.

Always identify which ratio is reported. Average-to-minimum and maximum-to-minimum ratios describe different relationships and should not be compared as though they are interchangeable.

 

Do I Need a Photometric Plan for an LED Retrofit?

A photometric plan is especially useful for an LED retrofit when fixture output, optics, spacing, mounting height, or space use will change.

Keeping existing poles or ceiling locations does not guarantee equivalent coverage. Replacement LEDs may distribute light differently from the original fixtures, creating new dark spots or excessive illumination.

Photometric analysis also supports new construction, renovations, and projects with specific owner or permitting requirements. Confirm required deliverables with the project designer and reviewing authority early in planning.

Frequently Asked Questions

Does a photometric plan guarantee installed light levels?

No. A photometric plan predicts performance under modeled conditions. Installation differences, product variations, and site conditions can affect actual results. Field measurements can help verify performance after installation.

Can a foot-candle grid prove that lighting will be comfortable?

No. Illuminance values alone do not establish visual comfort. Glare depends on factors including fixture brightness, shielding, aiming, and viewing position, which may require additional evaluation.

Does a photometric plan replace electrical drawings?

No. Photometric plans address lighting performance and layout, while electrical drawings address requirements such as circuits, wiring, power distribution, and controls.

Plan Lighting Performance Before Purchasing

A photometric plan turns lighting goals into a fixture layout you can evaluate before installation. Its value depends on accurate project information and calculations that reflect the products being purchased.

Stouch Lighting can help evaluate fixture options and develop photometric layouts for commercial lighting projects. To start the conversation, send our team:

    • CAD drawings or dimensioned PDF site plans.
    • Current or proposed fixture schedules and mounting heights.
    • Site photos showing obstructions and installation conditions.
    • Lighting targets, project requirements, and purchasing timelines.

Contact Stouch Lighting to discuss a photometric layout and fixture recommendations for your project.